We examine the implication of intracavity nonlinearity for harmonic mode locking (HML) by exploiting highly nonlinear fiber in a carbon nanotube film mode-locked Er-doped fiber laser. It is found that the reasonably large nonlinearity is of benefit to increase the extent of harmonic order while the excessive nonlinearity leads to some peculiar multi-pulse patterns such as noise-like pulse and soliton rain. Via appropriate nonlinearity management, nearly 4 GHz repetition rate pulses at the 91st harmonic with 936 fs pulse duration are delivered under the pump power of 280 mW. The pulse stability is evidenced by the super-mode suppression ratio of 35.6 dB. To the best of our knowledge, it is the highest repetition rate yet reported for a passively HML fiber laser based on a film-type physical saturable absorber. Furthermore, the laser exhibits steep pumping efficiency slope of $\gt19\;\rm MHz/mW$, which is also a record among all of the passively HML fiber lasers.In this Letter, we present a deep-learning-based method using neural networks (NNs) for inverse design of photonic nanostructures. We show that by using dimensionality reduction in both the design and the response spaces, the computational complexity of the inverse design algorithm is considerably reduced. As a proof of concept, we apply this method to design multi-layer thin-film structures composed of consecutive layers of two different dielectrics and compare the results using our techniques to those using conventional NNs.In this Letter, numerical and experimental studies for the spoof-anapole effect are presented. Different from the anapole modes, when electric and toroidal dipole intensities are minimized, the spoof-anapole effect can be generated. The spoof-anapole effect can reduce the radiation losses with a high $Q$-factor. The concept is valid in various frequency bands from microwave range for millimeter-sized objects to visible range for nanoparticles. The spoof-anapole modes are first experimentally realized in microwave metamaterials. Almost perfect spoof-anapole behavior is observed, which produces an extremely high $Q$-factor at the resonance frequency. The experimental results agree well with the analytical ones and pave way to excite the non-radiating electromagnetic sources.An optical switch with ultra high extinction ratio is proposed. Optical switching is realized using the resistive switching effect through the lateral coupling between the input nanophotonic waveguide and output waveguide at a wavelength of 1550 nm. The coupled waveguide system is engineered to increase the number of mode beats in a unit length of the device. An increase in the number of mode beats and controlled diffusion of metal ions through a thin dielectric layer with an applied electric field is responsible for a high optical extinction ratio of 27 dB for a 20 ?m long device. Compared to electrical control by plasma dispersion in silicon, the resistive switching effect enables a reduction in the coupling length and an increase in the waveguide absorption, leading to an almost 100 times higher extinction ratio. The proposed compact on-chip silicon-based nanophotonic resistive device is a potential candidate for a large-scale integrated photonic circuit for applications in optical switching, modulation, memory, and computation.In this Letter, we propose and demonstrate a novel wireless communications link using an illuminating optical fiber as a transmitter (Tx) in optical camera communications. We demonstrate an indoor proof-of-concept system using an illuminating plastic optical fiber coupled with a light-emitting diode and a commercial camera as the Tx and the receiver, respectively. For the first time, to the best of our knowledge, we experimentally demonstrate flicker-free wireless transmission within the off-axis camera rotation angle range of 0-45° and the modulation frequencies of 300 and 500 Hz. We also show that a reception success rate of 100% is achieved for the camera exposure and gain of 200 ?s and 25 dB, respectively.In this study, we demonstrate real-time terahertz (THz) spectroscopy using a rapidly wavelength-switchable injection-seeded THz parametric generator. We developed a wavelength-switchable external cavity diode laser using a digital micromirror device as a seed source for the generator. We realized fast acquisition of THz spectra by switching the wavelength of the laser for each pump beam pulse. This system can rapidly switch wavelengths and easily increase the number of measurement wavelengths, and it also has a wide dynamic range, of more than 75 dB, and high stability. Furthermore, by combining this system with THz parametric detection, all wavelengths can be detected in a single frame using a near infrared camera for real-time reagent measurement.In recent years, many researchers have tried to control and design the collapsing behavior of light beams in nonlinear media. Vector beams coupling with spin and orbit angular momentum freedom have attracted more and more attention. In this Letter, we study the collapse of a hybrid vector beam (HVB) propagating through rubidium atomic vapor. First, the HVB collapses into filaments located at positions with linear polarization. As propagation distance in atomic vapor increases, the locations of the filaments switch from positions with linear polarization to those with circular polarization. In this process, the absorption of the medium plays an important role. Results indicate that the absorption can be used as a degree of freedom to modulate the filamentation. Furthermore, by analyzing the polarization angle of an elliptically polarized position on the transverse plane of the HVB, we demonstrate the evolution of polarization distribution of HVB during propagation. Such results could have application in manipulating other structured beams and could be potentially applied to realize optical switches or logic for information processing.An optical Airy channel is built in a paraelectric Mn KLTN crystal via a photo-induced Airy beam based on the photo-refractive effect. A laser beam, incident with the main lobe of the Airy channel, propagates along the Airy channel with a bias field as the control parameter. https://www.selleckchem.com/products/blebbistatin.html We find that the light beam is nicely confined in the Airy channel and propagates along it, presenting Airy-like properties of non-diffraction and bending action under a certain voltage range; then a breathing soliton can be formed with bias electric field rising, originating from space-charge-field-induced nonlocal refractive index perturbation. The experiment is corroborated by simulation. This Letter opens up new possibilities for fabricating an electrical engineering functional device, such as optical routing.